manualshive.com logo in svg

ABB Ability, User Manual

Share
Download
ABB Ability User Manual Download Page 74

11

A B B  A B I L I T Y

T M

 ED G E I N D US T R I A L G AT E WAY

74

To initiate firmware update process via CCT, user need to provide working internet connection to 
gateway’s ETH0 port. Once internet connection is available to gateway, user need to wait till LED1 goes 
GREEN in the Gateway. Once, LED1 is GREEN, user can press “update” button as shown above in Figure 31 
to start the firmware update process in Gateway. A dialogue window will pop-up to confirm to continue 
the process. Once user press “Yes” button, firmware update process is initiated in the Gateway.

The firmware update process in Gateway is initiated with Provisioning Tool sending the relevant 
information to the Gateway to download the firmware file from ABB hosted cloud. With this download 
process in initiated and once it is completed, Gateway will apply the update & reboot gateway.

—
Figure 31

Summary of Contents for Ability





































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands