ABB Ability, User Manual

Page: 56 / 100

9
A B B A B I L I T Y
T M
ED G E I N D US T R I A L G AT E WAY
56
This product is not provided with any ON/OFF switch.
The Power IN connector is the disconnecting means from the power supply network.
—
9.1 How to supply power to the product
9.1.1 Power IN connector and mating connector specifications
The power input is protected against: surge, noise, reverse polarity, over-voltage.
NOTICE
The Power IN connector is NOT protected against short circuit. Always include an external
fuse to protect the product!
The ABB Ability™ Edge Industrial Gateway provides the Power IN connector on the rear side.
Connector layout:
Connector Pinout:
Connector specifications:
• Base strip, Header.
• Gender: Male.
• Type: 3-pin, 3.5 mm pitch.
Mating connector specifications:
• Pluggable screw terminal block.
• Gender: Female.
• Type: 3-pin, 3.5 mm pitch.
• Example:
• Manufacturer: Phoenix Contact.
• Part Number: MC 1,5/ 3-STF-3,5 - 1847068 (or equivalent).
—
How to supply power to the product
Power supply Nominal: 12 or 24 VDC; Range: 9 to 30 VDC with transient protection
Power consumption 4 W typical; 15 W maximum
Peak demand < 15 W
Pin # Signal Type Description
1
V+ P +5V
2
D- IO Negative data
3
D+ IO Positive data
4
GND P Ground