ABB Ability MACHsense-R, User Manual, Page: 65 / 74

4. Locate the green connectors with general purpose output terminals marked
GPIxx. Check the polycarbonate protective sheet to identify the terminals.
GPI/PWR OUT/RS485
GPI03 GPI02 GPI01 PWR OUT* RS485
GND A B
GPI00
GND GPI GND SV GND 24V NC
5. Connect the cable wires to the connector by inserting the wires into the green
terminal and pressing the orange locking mechanism.
6. Connect the signal input wire to the GPI terminal and the ground wire to the
GND terminal, as shown in the above figure (step 4).
Using GPIO interface 65