ENG
39
7.2.1 Switching and dimming of lamps
•
Press "Light" button on remote control unit.
-
The word "LIGHT" appears in the remote control unit display. This mode is active for
25 seconds. After this, the display goes back to audio/video. Press the LIGHT key one
more time if required.
•
Switch the lamps according to the table below.
„LIGHT+1+B“ in the table means that these three keys must be pressed one after the
other (not simultaneously).
Function
Keys to be pressed
Lamp 1 ON
LIGHT+1+B
Lamp 1 brighter
LIGHT+1+B (press B permanently)
Lamp 1 OFF
LIGHT+1+E
Lamp 1 darker
LIGHT+1+E (press E permanently)
Lamps 2 – 9 are actuated in the same way as lamp 1.
Lamp 10 ON
LIGHT+0+B
Lamp 10 brighter
LIGHT+0+B (press B permanently)
Lamp 10 OFF
LIGHT+0+E
Lamp 10 darker
LIGHT+0+E (press E permanently)
