5 Service and maintenance
52 |
266 MODBUS® multivariable transmitter User manual 2105216 Rev. AB
7.
If the new module does not have an HMI connector installed, carefully remove the connector from the old electronics
module and insert it into the new electronics module (Figure 41). Go to section 5.5,
, for
additional information.
Figure 41: HMI connector
8.
Install the new electronics module.
a.
Attach ribbon cable to the new module (Figure 40, page 51).
b.
Push the new module into place.
c.
Secure the module with the fastening screws (Figure 39, page 51).
9.
Disable write protection by flipping switch 5 to the down (OFF) position (Figure 42). DIP switches are numbered from left to
right starting with 1.
Figure 42: DIP switch 1
Summary of Contents for 266 MODBUS
Page 163: ......
