Variable edit
Procedure
Action
Touch Add button, the following interface shows:
Add variable
Choose the module followed by the variable type to be added from the
dropdown list. You can edit its name by selecting the button with the
ellipsis. A soft keyboard shows with which you can enter the variable
name.
Note: The variable shown name should be no longer than 25 characters
which can include numbers, letters and the underline sign.
Note: No more than 12 variables can be added.
Select the variable to be modified and press the modify button. The
variable, its module, type and name can be modified in the drop drop-
down list or by using the soft keyboard. Select cancel if no modification
is needed.
Modify variable
Select the variable to be deleted and press delete. The variable is deleted
from the monitor variable list.
Delete variable
When you have finished editing, select Save to save any changes. Press the Back
to Production button to return to the Production main interface.
Note
The variable configuration includes three elements: TASK, Storage type and
Scope.
Their scopes are:
Task: T_ROB1;
Scope: Global, Task and local
Storage type: only Persistent
If the scope and storage type of the variable is not correct it can not be monitored.
Product Manual - FlexGripper-Claw
107
4GAA40401009901-001 Revision: A
© Copyright 20132019 ABB. All rights reserved.
3 FlexGripper UI
3.2.4.2 Setup
Continued
Summary of Contents for FlexGripper
Page 1: ...ROBOTICS Product Manual FlexGripper Claw ...
Page 112: ...This page is intentionally left blank ...
Page 114: ......
Page 115: ......