i-STAT
Alinity v
— User Manual
650-7100 Rev. A
8
Regulatory Compliance
(Continued)
users, the antenna type and its gain should be so chosen that the equivalent
isotropically radiated power (e.i.r.p.) is not more than that necessary for successful
communication.
This radio transmitter (identify the device by certification number, or model
number if Category II) has been approved by Industry Canada to operate with
the antenna types listed below with the maximum permissible gain and required
antenna impedance for each antenna type indicated. Antenna types not included
in this list, having a gain greater than the maximum gain indicated for that type,
are strictly prohibited for use with this device.
For product available in the USA/Canada market, only channels 1-11 can be
operated. Selection of other channels is not possible.
If this device is to be operated in the 5.15~5.25 GHz frequency range, it is restricted
to indoor environments only.
Antenna: Laird Technologies, Mini-NanoBlade
Antenna gain information: Embedded Antenna: 2.5dBi (2.4 GHz), 4.8dBi (5 GHz)
Frequency Tolerance: +/-20ppm
Wireless Labeling
The i-STAT Alinity v Analyzer includes the FCC mark and FCC module identifier.
Table for Wireless Specification for the i-STAT Alinity v Analyzer
i-STAT Alinity v Analyzer
Wireless Characteristic
Network Standard
Maximum RF Power
Typical Maximum SAR
Wireless QoS Requirements
Radio Band Center Frequencies
Modulation Types
IEEE 802.11a, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n
(1-stream)
200mW
765 mW/kg at 0cm
None. Best-effort delivery service is sufficient.
802.11 b/g/n
2.412 – 2.472 GHz
802.11 a/n
5.180 – 5.825 GHz
OFDM
(64QAM, 16QAM, QPSK, BPSK)
DSSS
(CCK, DQPSK, DBPSK)
DSSS-OFDM
(64QAM, 16QAM, QPSK, BPSK)
