9
door.
Warning:
Use only Abatement Technologies pre-filters, HEPA filters, and replacement parts. Substitute parts
void the warranty, jeopardize worker and environmental safety, and adversely affect engineered performance
levels.
HA700 AND HA700A SPECIFICATIONS
FEATURE
HA700 and HA700A
Net weight w/ filters:
45 lbs.
Shipping weight:
54 lbs.
Dimensions:
24" L x 18" W x 17.25" H.
Power supply requirements:
120 volts AC, 60Hz, 15 amp circuit.
Normal operating amps:
2 amps.
Motor:
225 watt, motorized impeller with thermal overload
protection, auto re-set, 60 HZ, single phase.
Operating flow rate* (with clean filters): Variable, 400
– 700 CFM
Operational sound level:
63 dBA on high speed. Reading taken at a distance of 5
’.
Cabinet material:
20 gauge galvanized steel, assembled with rivets. Critical
seams are gasketed.
Transportability:
Carrying handles on top of unit.
Stackability:
The 4 plastic guides on top panel and 4 rubber feet on bottom
panel enable up to 3 units to be stacked.
First stage pre-filter:
1” deep coarse particulate pre-filter (P/N: F621).
Second stage pre-filter:
2" deep pleated particulate pre-filter (P/N: H502).
Alternative second stage pre-filter:
2" deep high capacity carbon filter for odors (P/N: VL1002).
HEPA filter:
HEPA mini-pleat filter with continuous seamless gasket, tested
and certified to an efficiency of 99.97% or higher against 0.3
micron size particles (P/N: H161606-99).
Air outlet collar:
12" diameter.
Note:
Specifications subject to change without notice.
*Airflow ratings estimates are based on factory testing @ 120 VAC with an air straightener and a traverse of
readings taken with a computing vane-anemometer. Actual results may vary for various reasons, including
motor and blower and HEPA filter tolerances. Factors such as filter loading, reduced voltage to the motor, and
inlet and outlet ducting will reduce airflow. Use these ratings as a general guideline only.
