ab Connect one55, User And Installation Manual

Page: 69 / 84

Ashton Bentley Connect one55 User and Installa on Manual
57
Line 1: Codec communica ons failure.
Line 2:
Line 4: Error 005
Error Message
Some mes the communica ons with the codec
has failed. Check codec status is OK and that no
confi gura on changes have been made to the
codec. Check the serial cabling.
Remedy
Line 1: This screen is connected to the incorrect
abox port for single screen mode.
Line 2:
Line 4: Error 006
Line1: The screen is connected to the incorrect
abox port.
Line 2: Please ensure that the screen power cable is
plugged into screen socket “1” on the termina on
panel.
Line 4: Error 007 Line 1: Interface table box is disconnected.
Line 2:
Line 4: Error 008
Line 1: Codec login failure.
Line 2:
Line 4: Error 009 The abox TM is able to communicate with the
codec, but has detected that the codec’s serial
port is password protected. Remove the user
name and password protec on from the codec
(serial port only).
Move the yellow M12 connector and plug it into
screen output 1 on the abox
TM .
Check that the cable between the abox
TM
and the
Interface has not been damaged. Check that the
end connectors are pushed fully home and are
screwed securely into posi on.