ab Connect one55, User And Installation Manual

Page: 57 / 84

45
Ashton Bentley Connect one55 User and Installa on Manual
10.D - System Power On/Off
The system does not have an on/off bu on, this
func on is automated!
When you have fi nished a laptop presenta on,
simply unplug your laptop and the system will
switch off . If you wish to leave your laptop
connected, and want to switch off , press the
green bu on associated with the laptop and the
system will turn off .
If the videoconferencing codec is “awake”
or not in standby when the laptop is
disconnected, the system will switch to the
codec when the laptop signal is removed. To
send the videoconferencing codec to “sleep”
or put it into standby mode, press the green
videoconferencing bu on.
The system can also be woken up by plugging a
device in to either one of the interfaces video
inputs. Once a signal is detected the system will
power up and the image will be displayed
10.E - Aux Device Input Selec on
The system also has the ability to house two
auxiliary devices such as mini PC’s, media
players, Apple TV or TV tuners. These devices
can be accessed by the user by pressing the Aux
bu on on the interface bu on panel (Shown
Right).
• Stepping through the Aux
Inputs and Behavior
Cycle the two Aux inputs by pressing the Aux
Bu on once then again. Note if no Aux inputs
are connected then the Aux bu on will go Red
when pressed, and you will have to then press
one of the other input bu ons (videoconference
or laptop) to get a signal on screen.
A variety of Aux device brackets
are available, and specials can
be ordered. Please contact your
reseller.