24V dc FLEX I/O 16 Sink Input Module 13
Publication 1794ĆIN072C-EN-P - October 2001
!
Agency Certification
(when product is
marked)
UL
UL Listed Industrial Control Equipment
UL
UL Listed for Class I, Division 2 Group A, B, C and D
Hazardous Locations
CSA
CSA Certified Process Control Equipment for Class I,
Division 2 Group A, B, C, D Hazardous Locations
EEx
2
European Union 94/9/EEC EMC Directive, compliant
with:
EN 50021; Potentially Explosive Atmospheres,
Protection n"
CE
2
European Union 89/336/EEC EMC Directive,
compliant with:
EN 50081-2, Industrial Emissions
EN 50082-2, Industrial Immunity
EN 61326, Meas./Control/Lab., Industrial Requirements
EN 61000-6-2, Industrial Immunity
C-Tick
2
Australian Radiocommunications Act,compliant with:
AS/NZS 2064, Industrial Emissions
1
You use this conductor category information for planning conductor routing as
described in the system level installation manual.
2
See the Product Certification link at www.ab.com for Declarations of Conformity, Certificates and other
certification details
This equipment is intended for use in potentially explosive atmospheres as defined by European
Union Directive 94/9/CE.
The LCIE (Laboratoire Central des Industries Electriques) certifies that this equipment has been
found to comply with the Essential Health and Safety Requirements relating to the design and
construction of Category 3 equipment intended for use in potentially explosive atmospheres, given
in Annex II to this Directive. The examination and test results are recorded in confidential report
No. 28 682 101.
Compliance with the Essential Health and Safety Requirements has been assured by compliance
with EN 50021 (1999).
