11
2. Insert the rear handle into the
opening of front handle.
3. Lock the lock buckle1 of the front
handle.
The pole hedge trimmer:
1. Unlock the lock buckle1 of the front
handle.
2. Insert the front hexagonal aluminum
pipe joint into the opening of the
front handle.
3. Lock the lock buckle1 of the front
handle.
4. Unlock the lock buckle 2 of telescopic
tube.
5. Insert the rear handle into the
opening of rear hexagonal aluminum
pipe joint.
6. Lock the lock buckle2 of the
telescopic tube.
The shoulder strap
1. Use your thumb or fingers to squeeze
the safety lock piece, put the hook to
the hanging part of the tool.
2. Move slide buckle to adjust the
length of the shoulder strap. Adjust
the length of the shoulder strap to
obtain a comfortable working
position. A few practices swings
without starting motor should be
made to determine correct balance.
3.
Put the shoulder strap over your
right shoulder. Carry the tool engine
at the right side of your body.
4. If the shoulder strap is too close to
your body, you can loose the hex
screw with hex wrench, then push
the lock ring further. When the
distance is fit for your operation,
tighten the hex screw.
The auxiliary handle
Place the auxiliary handle to telescopic
tube, adjust to desired position and
tighten the screw (A) by Allen key set
(B)firmly.
