background image

10

INTENED USE

1. Only cut hedges. Do not use this

product for other uses for which the
product has not been designed to
carry out. Do not use this product to
cut plastic parts, bricks or
construction materials. Do not use
this product to move objects.Any
other use could lead to dangerous
situations.

2. This product is intended for

private domestic use only, not for
any commercial trade use. It must
not be used for any purposes other
than those described.

ASSEMBLY

Unpack

1.

Carefully remove the product and any

accessories from the box. Make sure
that all items listed in the packing list
are included.

2.

Inspect the product carefully to

make sure no breakage or damage
occurred during shipping.

3.

Do not discard the packing material

until you have carefully inspected
and satisfactorily operated the
product.

4.

If any parts are damaged or missing,

contact our customer service center.

NOTE:

Be careful with small parts that

are removed during assembly or when
making adjustments. Make sure you do
not lose them.

WARNING:

If any parts are

damaged or missing, do not

operate this product until the parts are
replaced. Failure to heed this warning
could result in serious personal injury.

WARNING:

Do not attempt

to modify this product or create
accessories not recommended for use
with this product. Any such alteration
or modification is misuse and could
result in a hazardous condition leading
to possible serious personal injury.

WARNING:

Do not connect

to power supply until assembly is
complete. Failure to comply could
result in accidental starting and
possible serious personal injury.

PACKING LIST

- Hedge trimmer

1 pc

- Bar Sheath

1 pc

- Guard

1 pc

- Guard Screw

4 pcs

- Hex. Key

1 pc

- User Manual

1 pc

- Extension Tube

1 pc

- Shoulder Strap

1 pc

The Guard

Place guard as shown this Figure, Insert
the 4pcs screws and tighten

The normal hedge trimmer:

1. Open the lock buckle1 of the front

handle.

Summary of Contents for A11705






















Reviews: