Aaton
Camera body
37
Camera variable (VAR) speed
To choose a specific speed, press the «set» key, then the «var» key. Make your
selection of any .001 incremented crystal speed between 1.000 and 50.000
fps via the «jog» wheel. Afterwards, pressing the «set» or «exit» key will vali-
date your selection.
Adjusting the battery warning levels
Penelope displays a warning level when the battery voltage falls below a preset
level. The thresholds set for Batt.1 and Batt.2 do not overide the cameras
default minimum levels.
To adjust these levels, press «set» key then «sech» key to open the
technical
menu. Select the
Bat Alert
sub-menu and press «right» key to access. Select
a value between 10.8V and 14V for battery 1 by rotating the «jog» wheel, or by
toggling the «top» and «down» keys. Follow the same procedure to adjust
battery 2 level.
Aaton suggests a value of 10.8V when using NIMH batteries and a value
between 13.2V and 14V when using Lithium-Ion batteries. Press the «set» or
«exit» keys to validate your selection.
A4
Summary of Contents for Penelope
