AAton Penelope, User Manual

Page: 51 / 60

Aaton Video
51
With the camera body powered up, turn on the video by pressing the “Set” key
followed by the “on/off” key.
• To access the Video menu press the “set” key then the “vid” key.
• A warning message is displayed on the camera LCD screen (assistant side).
• Use the “up” and “down” keys to select the sub-menus and “left” and/or
“right” to access them.
Note : the camera status information is as follows :
RUN
in red color when the
camera is running,
STOP
in green color when the camera is stopped.
4.1 Video Menu
• Use the “up” or “down” keys to select the desired parameters. Once selected,
enter the parameters setting with the “left” or “right” key and use the “up” and
“down” keys to modify them, then press the “exit” key to validate the data and
return to the previous level.
• The Video menu allows you to set up the following video image parameters:
Gain level, Output (color or Black and White), Color temperature, Color satura-
tion, Color Bar output and User color temperature (note that this mode is only
accessible if USER mode has been chosen in the Color temperature mode).