AAT V-MAX2, Translation Of The Original User Manual

Page: 34 / 40

34
10 Status information
The status indicator LED is
flashing.
The LED is flashing Warning reason
Orange
Temperature, current requirement or battery voltage too high / too low
Possible colours:
Green =
fully operational
Flashing orange = warning
Flashing red =
fault
Alternating green/red = immobiliser activated
10 1 Warnings
The LED is flashing Fault condition
1 x red Excessive temperature Motor
2 x red Voltage too low Battery pack
3 x red Excessive voltage Battery pack
4 x red Error Electromechanical brake
5 x red Error Motor controller
6 x red Error Overload (excessive current)
7 x red Error Communication bus Operating unit / Drive / Battery pack
8 x red General error in battery pack
9 x red Error in the operating unit
10 x red Error in the non-volatile memory (speed level, immobiliser, etc.)
If warning limits are exceeded, the driving speed is reduced.
This is additionally signalled by an introductory beep.
10 2 Fault conditions
The flashing pulses are continuous and separated by a clearly visible pause.