background image

32

9 4  Long-term storage

If 

V-MAX

2

 is not used for an extended period of time (e.g. over several months), observe the following 

information:

• 

Observe the wheelchair manufacturer’s information if the wheelchair is to be stored!

• 

No moisture shall reach the inner parts of the device. 

• 

Store in dry rooms and avoid excessive air humidity. Cover with film, if necessary!

• 

Protect against permanent exposure to sunlight!

• 

 Unauthorised persons, especially children, should not have unsupervised access to the storage 

location of the 

V-MAX

2

!

• 

Remove the battery back before placing in storage! 

• 

 When storing the battery pack, it is mandatory to observe the safety instructions in the chapter 

"Battery pack and charger"!

When the 

V-MAX

2

 is to be put in operation again, clean the wheelchair and the product (chapter 

"Cleaning").

Check whether a technical safety test must be performed. (Refer to chapter "Technical safety test")

If a technical safety test is not necessary, electrical function, anti-tip supports, brackets and, if neces-
sary, the air pressure of the castors must be checked prior to start-up!

9 5  Technical safety testing

i

   NOTE - Technical safety tests may only be performed by the manufacturer, the AAT field staff 

or the authorised specialist shop.

i

   NOTE - It is recommended to perform a technical safety test every two years. The inspection 

plate provides information about the latest date. Tip: After a change in operator/reuse.

Improper use can lead to damage on the 

V-MAX

2

 which may im-

pair the technical functionality. For this reason, a technical safety 

test should be carried out every 2 years. We also recommend the 

technical safety test before each reuse.

Training is required in order to be able to perform the technical 

safety testing. For more information, please visit:

www aat-online de

The test badge shows when 

the test is to be carried out at 

the latest!

Summary of Contents for V-MAX2









































Reviews: