AAT MEGA II CLEANER, Operating Manual

Page: 74 / 92

66 Rev. 2.0 10/15/2005 Mega II Operating Manual
B.5.2.3 DISPLAY MEASUREMENTS
Measurement data is displayed in a separate window that can be resized, use a
different font and color, and be moved to any place on the screen. In addition,
the measurement data window can be set to be “ Always On Top ”. With this
setting enabled, the 200CR main program can be minimized (hidden) and the
measurement data window will still be displayed on the screen. The
measurement window will also be displayed over all other programs that run
under the Windows operating system.
To display measurements from the 200CR meter, from the main menu select
“200CR Functions ” followed by “ Display Measurements ”.
B.5.2.4 CHANGING FONTS
The Fonts dialog box is used to select the font type, size, and color for displaying
data log tables or measurement data. To change a font, from the main menu
selecting “ Setup ” followed by “ Select Font ”.
B.5.2.5 DATA LOGGING
Measurement data from a 200CR can be saved on a disk. The name of the file
and the time interval between each measurement is set via the menus. To setup
a data logging session, from the main menu select “ Setup ” followed by “ Setup
Data Logging ”.
To begin data logging from the main menu select “ Data Log ” followed by “ Begin
Data Logging ”.
B.5.2.6 SAVING MEASUREMENT DATA TO DISK
The data log must be set with a time interval and a file name. The time interval
specifies the number of seconds between saving sets of measurement data. The
file name and drive letter can also be set.
The “ Clear All Previous Log Data ” button can be checked if it is preferred to
clear the data log file each time the data log is started. The program will always
require a confirmation before clearing any data. If this button is not checked the
data will be appended to the current file.
B.5.2.7 DISPLAYING PREVIOUS SAVED MEASUREMENT DATA
Data from a data log file can be displayed from the main menus by selecting
“ Data Log ” followed by “ Display Data Log ”.
The font can be changed from the menus and the data log file can be printed.
B.5.2.8 PRINTING
A data log file can be printed after it is opened via the print command in the
main menu.