background image

26

  WARNING – No moisture must be allowed to enter the interior of the device!  

 

This may result in electric shocks! Use only damp cloths for cleaning the device’s surface!  

 

Never use wet cloths!

  WARNING – Test all safety-relevant functions after cleaning!

  WARNING – Do not smoke during cleaning!

i

  NOTE – Keep max-e away from sources of ignition!

i

  NOTE - Clean the drive unit, tooth segments and drive shafts in the event of  

 dirt/deposits!

i

  NOTE – Clean the wheelchair according to the manufacturer’s information! 

i

  NOTE – Do not use a high-pressure cleaner!

If you wish to disinfect max-e, 

use common household 

disinfectants and perform a 

wipe disinfection. 

 

»

Observe the manufacturer’s 

information.

Clean the max-e surfaces 

with common household 

cleaning agents.

 

»

Observe the manufacturer’s 

information.

9.3  Cleaning

9.4  Disposal

max-e and its batteries must not be disposed of in places that are not 

intended for this purpose (e.g. landfills) according to the current legislation 

in force in each respective country. Substances may be present that 
could prove to be harmful to the environment. 
 
The product marked with a crossed wheelie bin cannot be disposed 
of with household waste (WEEE Directive). Inform yourself about the 
valid statutory provision in your country as the WEEE regulation is not 
applicable in all European countries.

Your max-e and its batteries are durable products. After expiry of the natural service life, you can return 
these components to AAT Alber Antriebstechnik GmbH or their specialist dealers for disposal.

Summary of Contents for MAX-E Q1604

































Reviews: