background image

22

8  Transport 

 

WARNING – Do not use max-e with wheelchair as a seat in a vehicle! 

  WARNING – Secure according to valid statutory provisions  

 

during transport in vehicles/aeroplanes!

 

CAUTION – Switch off during transport!

 

CAUTION – Observe the vehicle’s weight specifications!

 

i

  NOTE – Store in a frost-free environment at least one hour prior to start-up 

 

to avoid malfunctions!

Disable max-e (see chapter 

6.5) 

Dismantle max-e (see 

chapter 7).

 

» Lift the max-e onto the grip 

recess.

 

» The pair of wheels with 

toothed rings do not have 

to be removed from the 

wheelchair. 

9  Care and maintenance

  WARNING – Repairs and technical safety tests are performed by the manufacturer,  

 

the AAT field staff or the authorised specialist shop!

 

i

  NOTE – Perform a visual inspection prior to each start-up! If parts are visibly defective  

 

or missing, contact the authorised specialist shop or the manufacturer!

i

  NOTE – It is recommended to perform a technical safety test every two years. 

 

The inspection plate provides information about the latest date. Tip: After a change in  

 

 operator/reuse.

i

Manufacturer's information:

Batteries are not considered dangerous goods according to IATA 

special provisions A67, GGV-SEB (Goods Transportation Regulations) 

and GGVSee (Goods Transportation Regulations over Sea)! 

Batteries are permitted for air travel in accordance with DOT and 

 

IATA!   However, make sure you contact the airline company in advance  

before boarding a flight.

Stow securely in the vehicle 

boot.

 

» Do not place the pair of 

wheels on push rims to 

avoid scratches!

Summary of Contents for MAX-E Q1604

































Reviews: