manualshive.com logo in svg

AAT c-max U1 C1414, Translation Of The Original User Manual

Share
Download
AAT c-max U1 C1414 Translation Of The Original User Manual Download Page 26

26

8.6  Laying the device down on the stairs / emergency stop function

Lay down the c-max U1.

 

» Safety brakes prevent from 

rolling down!

 

» Keep the UP/DOWN switch 

pressed until the climbers 

are retracted completely.

Please note:

 When laying 

down the c-max U1 on the 

stairs it 

has to

 lie on its main 

wheels. Otherwise the safety 

brakes may not grip!

Emergency stop function

In hazardous situations follow the next steps:

 

» 1 - Release the UP/DOWN switch

 

» 2 - Turn off the c-max U1 by pressing the ON/OFF switch

 

» 3 - Pull out the safety chip for the engine immobilizer

 

» Lay down the c-max U1 as mentioned

Eliminate the hazardous situation and start climbing again

 

» Insert the safety chip

 

» Turn the c-max U1 on by pressing the ON/OFF switch

 

» Press the UP/DOWN switch

8.7  Parking

i

  NOTE - only park the c-max U1 on fl at ground.

i

  NOTE - Charge the battery pack after each use.

The automatic switch-off turns the device off during longer periods of inactivity. Turn the c-max U1 

OFF

 fi rst and then 

ON

.

Set in neutral position.

 

» Climbers have to be retract-

ed entirely.

Turn the c-max U1 on by 

pressing the ON/OFF switch.

Pull out the safety chip for en-

gine immobilizer.

Summary of Contents for c-max U1 C1414





































Reviews:

No comments

Brands by name

Popular brands

Load more brands