manualshive.com logo in svg

AAT c-max U1 C1414, Translation Of The Original User Manual

Share
Download
AAT c-max U1 C1414 Translation Of The Original User Manual Download Page 16

16

6.1  Adjust the handles

  WARNING - Always tighten the locking screws, as otherwise parts can suddenly become loose!

  CAUTION - To avoid injury, beware of pinch points at the notch opening!

Release the locking screws

 of the handles counter 

clockwise.

Adjust the height of the han-

dles to shoulder height.

Tighten the locking screws.

6.2  Insert battery pack and connect spiral cable

  WARNING - The battery pack has to be locked safely, otherwise it may move involuntarily!

Attach the battery pack.

Push the battery pack   into 

its  fixture  by  means  of  the 

guiding pins on the top of the 

housing. 

 

» Yellow release button locks 

automatically.

To remove the battery pack, 

push down the release button 

and pull out battery pack.

Plug in the helix cable.

Insert the plug of the helix 

cable into the socket and lock 

it with the security clip. 

To unplug the helix cable re-

lease the security clip and 

pull it off.

Summary of Contents for c-max U1 C1414





































Reviews:

No comments

Brands by name

Popular brands

Load more brands