Aastra VentureIP 480i, Administrator'S Manual

Page: 16 / 174

IP Phone SIP Admin Guide 9
IP
P
h
o
n
e
U
I
C
o
n
fi
g
u
r
a
ti
o
n
• Network Port 1 and Port 2
(9133i only)
Displays the network status of
the Ethernet ports at the back of
the phone. Also displays the IP
and MAC address of the phone.
These fields are read-only.
• Network Status
(480i and 480i CT only)
Displays the network status
of the Ethernet ports at the back
of the phone. You can
also view the phone’s IP and
MAC addresses. These fields are
read-only.
• Firmware Version
This option displays information
about the firmware that is cur-
rently installed on the IP phone.
• Restart Phone
This option lets you reboot the
phone. A reset may be necessary
when:
- There is a change in your
network, OR
- To re-load modified
configuration files, OR
- If the settings for the IP phone
on the IP PBX system have
been modified.
• Factory Default (admin only)
This option lets you reset the
phone to its factory default set-
tings. There are two options in
setting the factory defaults on
the IP phone:
-All Defaults
-Config Only
The "All Defaults" option resets
the factory defaults for all of the
settings in the aastra.cfg ,
<mac>.cfg, and local configura-
tion. Performing this option
results in losing all user-modi-
fied settings.
The "Config Only" option resets
the settings on the local IP
phone configuration only.
Reference
For procedures in setting factory
defaults, see
"Troubleshooting" on
page95 .