Aastra VentureIP 480i, Administrator'S Manual, Page: 43 / 174

36 IP Phone SIP Admin Guide
O
p
e
r
a
ti
o
n
a
l
F
e
a
tu
r
e
s
Do Not Disturb (DND)
The IP phones have a feature you
can enable called "Do not Disturb
(DND). You can configure DND on
softkeys and programmable keys
using the Aastra Web UI or the
configuration files.
If DND is configured on the phone,
the softkey or programmable key
switches DND ON and OFF. If the
phone shares a line with other
phones, only the phone that has
DND configured is affected.
The second line on the screen of
the IP phone shows when DND is
configured. When a call comes in
on the line, the caller hears a busy
signal or recorded message,
depending on the server
configuration.
Configuring DND
Use the following procedure to
configure DND on the IP phone.
From the configuration files:
For specific softkey and
programmable key parameters you
can set in the configuration files,
see
"Softkey/Programmable Key
Settings"
on page87.
From the Aastra Web UI:
1 Click on Operation->Program-
mable Keys.
2 Select a hard key to configure.
3 In the "Type" field, select "do
not disturb".
Note: You do not need to set the
"Value" for DND. DND is
applied to the hard key only.
4 Click to save your
changes. These changes are not
dynamic. You must restart your
IP phone for the changes to take
affect.
5 Click on Operation->Reset.
6 In the "Restart Phone" field
click to restart the IP
phone.
Call Forwarding
The call forwarding feature on the
IP phone allows incoming calls to
be forwarded to another
destination. The phone sends the
SIP message to the SIP proxy,
which then forwards the call to the
assigned destination.
Call forwarding is disabled by
default. You can enable call
forwarding on a phone-wide basis
or on multi-line phones (480i/480i
CT/9133i), on a per-line basis. If
you have configured call
forwarding on an individual line,
then the settings for this line are
used; otherwise, the phone-wide
call forward settings are used.
You can enable call forwarding on
all phones (global settings) or on
specific lines (local settings) of a
single phone. For call forwarding
you can configure the following:
• Destination number
• Call forward mode
• Number of rings before for-
warding the call (from 1 to 9
rings)