20 Venture 3-Line Telephone with Answering Device User Guide
Making & receiving calls
Adjusting the ringer
volume
When the phone is idle or ringing,
you can adjust the volume of the
ringer.
You need to adjust the volume for
each of the three telephone lines.
1.
Press
¶
.
The display shows:
Ringer volume
Select line key
2.
Press a line key.
3.
Press the right side of the
volume bar to increase volume
OR
press the left side of the volume
bar to reduce volume.
4.
Press
s
.
5.
Repeat for each line.
Using the Handsfree
and Mute features
during calls
When making or receiving calls you
can use the Handsfree speaker and
microphone instead of the handset.
When Handsfree is activated you or a
number of people can hold a
conversation without using the
handset. If you need to speak
privately or do not wish your caller to
hear room noise, you can mute the
sound so that your caller cannot hear
you.
☞
The Handsfree speaker and
receiver work most effectively
when set at moderate volume
levels.
To activate Handsfree
1.
Press the Handsfree/Mute key to
answer an incoming call or to
obtain a dial tone. The
Handsfree light turns on and you
will hear your caller or dial tone
through the Handsfree speaker.
2.
To end a handsfree call, press
g
.
To activate Mute
While on a handsfree call:
1.
Press the Handsfree/Mute key
again. The indicator light flashes
and the display shows
Microphone muted
. You can
still hear the caller but the caller
cannot hear you.
2.
When you want to be heard by
the caller, press the Handsfree/
Mute key again. The light stays
on to indicate you are still on
handsfree.
P0814619 01 E UG.VTAD Page 20 Wednesday, April 15, 1998 4:30 PM
