Features in Release 2.2
RN-001029-00, Rev 06, Release 2.2
61
5i Series IP Phone Release Notes
The recipient can drop the incoming page if required. The recipient can also set
Do Not Disturb (DND) to ignore any incoming pages.
For incoming RTP multicasts, the ringing display is dependant on the “
Allow
Barge-In
” parameter. If this parameter is
disabled
,
and there is no other call on
the phone, then the paging is automatically played via the preferred audio
device (see the model-specific
IP Phone User Guide
for setting Audio
Mode on the phone).
If there is an existing call on the phone,
the call initially displays in the ringing
state. The user has the option to accept/ignore the call. If the “
Allow Barge-In
”
parameter is
enabled
, the RTP multicast call barges in, and any existing calls are
put on hold.
If an RTP multicast session already exists on the phone, and the phone receives
another incoming RTP multicast session, the priority is given to the first multicast
session and the second multicast session is ignored. The behavior for the
incoming calls in this case is also based on the setting for the “
Allow Barge-in
”
parameter. The incoming call is handled as if there were an existing call already
on the phone.
Note:
For outgoing RTP multicasts, all other existing calls on the phone
are put on hold.