background image

Features in Release 2.2

10

RN-001029-00, Rev 06, Release 2.2 

IP Phone Release Notes 2.2

Configuring DND Using the Aastra Web UI

Use the following procedure to configure DND mode using the Aastra Web UI:

Aastra Web UI

1

Click on 

Basic Settings->Preferences->General.

.

2

In the “

DND Key Mode

” field, select a “do not disturb” (DND) mode to use on the phone.

Valid values are: Account, Phone, Custom. Default is 

Phone

.

account

 

Sets DND for a specific account. DND key toggles the account in focus on the
IP Phone UI, to ON or OFF.

phone

 

Sets DND ON for all accounts on the phone. DND key toggles all accounts on the
phone to ON or OFF.

custom

 

Sets the phone to display custom screens after pressing the DND key, that list the
account(s) on the phone. The user can select a specific account for DND, turn
DND ON for all accounts, or turn DND OFF for all accounts.

Notes

:

1.

If there is only one account configured on the phone, then the mode setting is ignored and the 

phone behaves as if the mode was set to “Phone”.

2.

Using the Aastra Web UI, if you change the DND Key Mode to “phone”, all accounts 

syncrhonize to the current setting of Account 1.

DND Key Mode
Parameter

Summary of Contents for REV 06



















































































































































Reviews: