DBC 425
WITH
SIP
FOR
MX-ONE
31
14/1553-ANF 901 54 Uen E 2009-11-04
2.15.5 Headset
Preset
By default the phone is set for calls to be connected to the loudspeaker
when you answer or make calls by pressing a
Line
/Hold key, so called
Loudspeaker Preset. Also when you dial the number without lifting the
handset, the call is automatically connected to the loudspeaker.
When you use a headset for your telephone, you can change the setting
to get calls connected to the headset instead, so called Headset Preset.
When the
Loudspeaker
key is pressed in this mode the call is
connected to the loudspeaker as long as the
Speaker
key is active.
Note:
Independent the type of preset setting, when you lift the handset
the call is always connected to the handset. Activation and
cancellation of Headset Preset can only be done when the phone
is in idle mode.
2.15.5.1 Activating
Headset Preset Mode
To activate headset preset mode, press the
Headset
key and hold it
down for 4 seconds. A ring signal is heard as acknowledgement and the
headset icon is displayed.
2.15.5.2 Deactivating
Headset Preset Mode
To deactivate headset preset mode, Press the
Speaker
key and hold it
down for 4 seconds. A ring signal is heard as acknowledgement and the
headset icon disappears.
2.16
Tones and Ring Signals
2.16.1 Tone
Characteristics
The telephone tone signals are as follows:
