Home
/
Aastra
/
Clearspan 6739i
/
User Manual

Aastra Clearspan 6739i, User Manual, Page: 124 / 209

Share

Page: 124 / 209

Aastra Clearspan 6739i User Manual Download Page 124

Options Key

118

41-001317-05 REV00 – 03.2011

Configuring an Intercom Softkey

Use the following procedures to configure an Intercom softkey on your phone.

Paging Key (Sends the RTP Stream)

You can configure a Paging key on the phone that allows you to send a Real Time Transport Protocol (RTP) stream to pre-
configured multicast address(es) without involving SIP signaling. You enter a multicast IP address(es) and a port number
for the Paging key, that when pressed, initiates an outgoing multicast RTP session. This is called Group Paging on the IP
phones.

You can also specify group paging RTP addresses that the phone listens for when receiving RTP streams. You can specify
up to 5 listening multicast addresses in the Aastra Web UI at the path,

Basic Settings->Preferences->Group Paging RTP

Settings

.

For more information about Group Paging and how it works, and to specify multicast addresses, see

“Group RTP Paging

(receives RTP streams)”

on

page 177

.

IP Phone UI

1.

Press

on the phone to enter the Options List.

2.

Press the

<Softkeys>

key. By default, all of the softkeys that display are configured as “

None

”.

3.

Press a

<None>

key. A softkey configuration screen displays.

4.

In the “

Type

” field, press the <

None

> key. A screen displays with softkey keys.

5.

Press the <

Intercom

> function key to apply to the softkey.

6.

In the "

Label

" field, enter a label to apply to this softkey.

7.

Press <

Save

> to save the softkey. The softkey applies to your phone immediately and displays on your idle screen.

8.

Press the

to return to the previous menu or press the

to return to the idle screen.

Aastra Web UI

1.

Click on

Operation->Softkeys and XML

.

or
Click on

Operation->Expansion Module.

Softkeys

2.

Select from “

Key 1

” through “

Key 55

”.

3.

In the "

Type

" field, select

Intercom

.

4.

In the "

Label

" field, enter a label to apply to this key.

5.

In the state fields, check (enable) or uncheck (disable) the states you want to apply to this softkey.

Expansion Module Keys

6.

Select an expansion module key.

7.

In the "

Type

" field, select

Intercom

.

8.

In the "

Label

" field, enter a label to apply to this key.

9.

Click

Save Settings

.

«
...
122
123
124
125
126
...
»

Summary of Contents for Clearspan 6739i


















































































































































































































Reviews:

No comments