1. Press the review
!
or
q
buttons as required to set the first
digit of your area code. Press the
ERASE
button to move to
the second digit.
2. Press the review
!
or
q
buttons as required to set the sec-
ond digit of your area code. Press the
ERASE
button to
move to the third digit.
3. Press the review
!
or
q
buttons as required to set the third
digit of your area code. Press the
ERASE
button to move to
set the correct time and date.
Setting the Time and Date
The AT-200HT has a built-in real time clock that will keep the
current time and date. The clock is automatically set during the
first call and is updated each time Caller-ID information is re-
ceived.
1. It is
not necessary
to enter the correct time and date when
the display indicates
"SET TIME/DATE"
after setting your
area code.
2. Press the
ERASE
button as required until the display enters
the Stand-By Screen mode as shown below.
3. After completing the setup procedure, you can change any
of the above settings.
9
Summary of Contents for AT-200HT Owner's
Page 28: ......
