11 Settings
What to do if SIM Switch doesn’t work
Your previously used SIM card will continue to work, unless there is a problem
on the AMCC-side: Check if there is a temporary problem by reinserting the
former SIM card. If it does not work, the error is likely to be located at the
AMCC.
If repeated attempts to Activate SIM Cards fail and if the configured number
of the second SIM card is correct, the reason could be an improper Caller ID
sent from your new SIM card. In those cases the switch has to be conducted
manually on the AMCC.
11.4.5
Voice Mail Number
If your Voice Mail is configured here, you have the possibility to access your corporate
voice mail messages via the AMC.
11.4.6
Take Number
Note:
This option might not be supported by your PBX.
This setting can be used to transfer calls from your desk phone to your mobile phone.
Please refer to the documentation of your PBX to check if it supports this feature. There
you will also find the information necessary for the configuration of this feature.
11.4.7
Cellular Handover Rejection
This setting only impacts handovers that were requested from the AMC because of
decreased Wi-Fi quality. If the Wi-Fi quality has increased, when the cellular call for the
handover comes in, the call will be rejected and the VoIP call will continue.
If this setting is deactivated, the handover will be carried out, even if the Wi-Fi quality
is excellent again. Please note that another handover from Wi-Fi to GSM may occur
automatically if the
Auto Handover
setting is active.
11.4.8
Call Reverse Number
The
Call Reverse Number
is only mandatory if the feature is to be used. It has to be
a number, again in international format, that has been configured for the
Call Reverse
purpose on the AMCC.
This can be enabled and disabled globally; refer to
11.1.2
.
amc-3.0_symbian_ug_en_2012-09
48
