8 Features of the AMC
8.6.5
Fast Forwarding
This option will forward the call to a predefined number. While in theory this can be
any number, this feature is most often used to transfer the call to the desk phone with a
single touch of a button. While the transfer to the predefined number is being executed,
the AMC offers you the possibility to
Resume
the call (the transfer will be interrupted).
Please note that this feature is executed like a Blind Transfer. If your PBX does not
support Blind Transfers, the Fast Forwarding feature will not be available.
For immediate transfer a
Fast Forwarding Number
has to be set (refer to
11.1.5
). If no
Fast Forwarding Number
has been set, the AMC will open a
keypad with which you can dial or choose a contact.
8.6.6
Handover to Cellular Networks (GSM)
It is possible to trigger a manual Handover to GSM/3G (cellular networks). You can find
the selection in the AMC
Options
menu when in call.
8.6.7
Handover to VoIP
It is also possible to trigger a manual Handover to VoIP if the Wi-Fi coverage is good
enough, as above the selection can be found in the AMC
Options
menu. If the ac-
cess point provides VoIP over 3G (
Packet Data
activated in AMC Network Settings and
Maintain 3G Connection
activated, refer to
11.2.2
)and a handover is made, it will not be
possible to get back to a Wi-Fi access point during the call. This depends on that the
phone can only have one single IP-address.
8.6.8
Automatic Handover to VoIP
If
Auto Handover
has been enabled in the settings of the AMC, a handover from Wi-Fi
to Cellular will be performed automatically if the Wi-Fi signal strength gets too weak
to maintain a reliable VoIP connection. A handover from Cellular to Wi-Fi on the other
hand will be performed if a known network with sufficient quality gets into range during
an ongoing cellular call. At the availability of a network with sufficient quality, the AMC
will take some time to assure it is a stable connection before a handover is performed.
If an access point provides VoIP over 3G (and the AMC is set to use this), it will not be
possible to get back to a Wi-Fi access point during the call. This depends on that the
phone can only have one single IP address.
amc-3.0_symbian_ug_en_2012-09
27
