13
Commissioning
Select …
Menu
❯❯❯
System > Subscriptions > New system
• Enter the access code (also referred to as the AC code). Your system administrator will provide you
with the access code (which consists of 1 to 8 digits).
• Select Enter PARK. Enter the PARK code. Your system administrator will also provide you with the
PARK code.
• Confirm with Ok. The registration process is then initiated.
Version 2: This is the simplified registration process, which is used when there is only one DECT sys-
tem operating in the same environment.
Select …
Menu
❯❯❯
System > Subscriptions > New system
• Enter the access code (also referred to as the AC code). Your system administrator will provide you
with the access code (which consists of 1 to 8 digits).
• Enter R and an *.
Instead of * you can also enter a specific call number that has already been set up; the registration
is then made for that particular number. Otherwise, the first available call number is assigned.
• Select Enter PARK.
• Confirm with Ok; no further input is required. The registration process is then initiated.
Registration
A registration is stored in the device for each communications system on which the handset has
been logged in. A registration entry also includes a system name (e.g. A, B, C,..).
If you have logged into the system with your handset, this name appears on the display.
Subscription
After the handset is subscribed in one or more communications systems you can use the telephone
to make and receive calls. If the Auto search feature (see page 71) is activated, the handset (in idle
mode) automatically selects the nearest accessible system and logs in there. If you don’t want to use
the Auto search feature, you can use the stored registration entries to carry out a manual log-in on
any system you want.
