Phoning
Aastra 6867i / Aastra 6869i
33
eud-1630/1.1 – R3.2 – 10.2014
Putting a call partner on hold
You want to briefly interrupt the active call.
You can put the call party on hold and then take them back again on the same phone.
Enquiry call during a call
You want to call someone else briefly without losing your current call partner. Then
you want to resume your conversation with your original call partner.
With the Enquiry function you can call someone else in the middle of a call and put
your original call partner on hold. You can make enquiry calls to both internal and
external users.
Hide number
Activating/deactivating calling line identification restriction permanently:
Press the function key for
Hide number
.
➔
Function is activated/deactivated, LED on the function key is switched on/off.
Hide number
Activating CLIR per call:
1. Press the function key for
Hide number
.
2. Enter the call number and press the
Select
softkey.
➔
Call number is dialled and your own number is not displayed to the called
party.
Putting the active call party on hold:
Press the Hold key.
➔
The call party is put on hold,
is displayed and the LED on the line key flashes.
Take back the call party on hold:
Press the Hold key, the flashing line key or the
Pick up
softkey.
➔
The call is active again.
Setting up an enquiry call (you are in an active call):
Press a free line key (select using the horizontal navigation key, if necessary, and
confirm with the selection key).
<Call number>
Enter the call number and press the
Dial
softkey.
➔
Enquiry call party is called; first call partner is put on hold.
Note:
If the other user does not answer, you can cancel the enquiry call with the
Cancel
softkey or with the End key and take back the first call with the flashing line key.
Ending the enquiry call:
Press the
Drop
softkey or the End key.
Retrieving the first parked call party:
Press the
Pick up
softkey or the flashing line key.
☛