Aastra 6755i User Manual Download Page 104

Page: 104 / 280

Model 6755i IP Phone User Guide

Line Keys, Programmable Keys, and Softkeys

Configuring Directed Call Pickup (DCP) Key (for Sylantro Servers)

Use the following procedure to configure Directed Call Pickup on the 6755i IP Phone. The

procedure shows the softkey screens as an example.

Click on

Operation->Softkeys and XML

or
Click on

Operation->Programmable Keys

or
Click on

Operation->Expansion Module <N>

Softkeys

Select from

"Key 1"

through "

Key 20

In the “

Type

” field, select

Directed Call Pickup

In the "

Label

" field, enter a label to apply to this Directed Call Pickup key.

In the “

Value

” field, specify the extension you want to intercept when you press this softkey.

For example:

2200

In the "

Line

" field, select the line for which to apply the Directed Call Pickup configuration.

Valid values are

through

In the state fields, check (enable) or uncheck (disable) the states you want to apply to this
softkey.

Aastra Web UI

Summary of Contents for 6755i

























































































































































































































































































Search results

Summary of Contents for 6755i

Reviews:

Aastra 6755i, User Manual, Page: 104 / 280

Search results

Summary of Contents for 6755i

Reviews: