background image

Supplementary features

 

62

Aastra 612d

eud-1584/1.0 – R3.0 – 04.2013

Functions for special situations

This section explains the different options provided by your phone to deal with 
special situations.

All the functions you can save under a configurable key can be found in chapter 

"Function selection for configurable key"

, page 

102

.

Picking up a call

You hear a phone ringing in your vicinity and want to pick up the call.

With the 

Pick up

 function you can pick up the call from the other phone on your own 

phone.

Press the navigation key to the right or the 

Menu

 softkey.

Call features

Scroll to 

Call features

 and press the 

Select

 softkey.

Pick up

Scroll to 

Pick up

 and press the 

Select

 softkey.

<Phone number>

Enter the number of the phone from which you want to pick up the call and 
confirm with the 

Ok

 softkey.

Note:

You can also find the call number of the user you want in the phone book or in 
a call list.

www.InternetVoipPhone.co.uk | [email protected] | 0800 088 48 46

Summary of Contents for 612d



























































































































Reviews: