Model 57i IP Phone User Guide
107
Line Keys and Softkeys
None Key
You can set a key to force a blank entry on the IP phone display for a specific key.
You do this by setting the key to "
none
". The keys are added in order (from key 1 to
key 20) after any hard-coded keys have been added. If a particular key is not defined,
it is ignored. For more infomration about key behavior, see "Key Display Behavior"
on page 58.
Setting a None Key
Use the following procedure to configure a None key on the 57i IP Phone.
1.
Click on
Operation->Softkeys and XML
.
or
Click on
Operation->Expansion Module <N>.
.
2.
Click on the
Bottom
tab or the
Top
tab.
3.
Select from
"Key 1"
through "
Key 20
" on the bottom tab.
or
Select from "
Key 1
" through "
Key 10
" on the top tab.
4.
In the "
Type
" field, select
None
.
5.
If configuring a softkey on the Bottom Keys, in the state fields, check (enable) or
uncheck (disable) the states you want to apply to this softkey.
6.
Click
to save your changes.
Aastra Web UI
