background image

Model 55i IP Phone User Guide

29

Softkeys and Programmable Keys

Depending on how the phone has been configured, the maximum number 
of total line/call appearances that can be set up is 8 or 9 (4 line/call 
appearance as hard keys and 4 or 5 as softkeys). If all line/call appearances 
have been set up for the same number, a total of 9 lines can be configured. 
If all line/call appearances have been set up between two different 
numbers, a total of 8 lines can be configured. This means that when all line/
call appearances are in use, 1 call is connected while the rest are on hold. 
No further outgoing or incoming calls can be made until one of the line/call 
appearances becomes available. 
In active states, such as ringing, conference, connected, etc., all softkeys 
disappear except softkeys that have been set up as line/call appearances, 
and any context dependent softkeys required for the active state, such as 
the 

Drop

 softkey in the connected state. Typically, context dependent 

softkeys appear in the top left position and all line/call appearance softkeys 
appear in the remaining positions. 

Note: In some situations, such as during a conference call, the line/call appearance 

softkeys may overwrite some of the context dependent soft keys. In this case, 
instead of the Previous and Next softkeys, up or down icons,

 

 

 

appear 

on the display. By using the 

 

 

navigation keys, you can access the 

same functionality as the

 Previous

 and 

Next

 softkeys. 

Summary of Contents for 55I IP PHONE - RELEASE 2.0

























































































































































Reviews: