24
/
IP Phone User Guide
Ha
ndling Cal
ls from the
480i
CT
Ba
se Sta
ti
o
n
10.Click
to save your
changes.
11.Click on Operation->Reset.
12.In the "Restart Phone" field
click
to restart the IP
phone.
For 480i CT Handset
1. Click on Operation->Handset
Keys.
2. Pick a handset key to configure
for parking a call.
3. In the "Key Function" field,
select Park.
4. Pick another handset key to con-
figure picking up a call.
5. In the "Key Function" field,
select Pickup.
6. Click
to save your
changes.
7. Click on Operation->Reset.
8. In the "Restart Phone" field
click
to restart the IP
phone.
Using the Park Call/Pickup
Parked Call Feature
Use the following procedure on the
IP phones to park a call and pick
up a parked call.
Park a Call
1. While on a live call, press the
"Park" softkey.
2. Perform the following for your
specific server:
If the call is parked successfully,
the response is either a greeting
voice confirming that the call
was parked, or a hang up
occurs. The parked call party
will get music on hold.
3. If the call fails, you can pick up
the call (using the next proce-
dure) and press the "Park" soft-
key again to retry step 2.
For Asterisk Server
- Server announces the extension
number where the call has been
parked. Once the call is parked,
press the
y
key to complete
parking.
For BroadWorks Server
- After you hear the greeting from
the CallPark server, enter the
extension where you want to park
the call.
For Sylnatro Server
- Enter the extension number where
you want to park the call, followed
by "#" key.
For ININ Server
- Enter the extension number where
you want to park the call, followed
by "#" key.
