/
IP Phone User Guide
21
Handli
ng Calls
from
the 48
0i CT Base
Station
Park Calls/Pick Up Parked
Calls
The IP phone (including the
480i CT handset) has a park and
pickup call feature that allows you
to park a call and pickup a call
when required. There are two ways
a user or adminstrator can
configure this feature:
• Using a static configuration
• Using a programmable
configuration
Note: The IP phone accepts both meth-
ods of configuration. However, to
avoid redundancy, Aastra Tele-
com recommends you configure
either a static configuration or a
programmable configuration.
The IP phone supports the Park/
Pickup feature on the Asterisk,
BroadWorks, Sylantro, and ININ
PBX servers.
The following paragraphs describe
the park and pickup methods of
configuration on the IP phones.
Park/Pickup Static Configuration
You can configure a static
configuration for parking and
picking up a call using the Aastra
Web UI at Basic Settings->
Preferences. By entering the
appropriate value in the "Park
Call" and "Pickup Parked Call"
fields, you tell the phone where to
park a live call and where to
pickup the parked call.
On the IP phone UI, the static
configuration method displays the
following:
• When a call comes in, and you
pickup the handset, the default
label of "Park" displays on the
Phone UI.
• After pressing the "Park" soft-
key to park the call, the default
label of "Pickup" displays on the
phone UI.
Note: On the 480i CT handset, pressing
Ï
displays the "Park" and
"Pickup" labels.
The values you enter in the Aastra
Web UI for the Park/Pickup call
feature are dependant on your
type of server. The following table
provides the values you enter for
the "Park Call" and "Pickup
Parked Call" fields in the Aastra
Web UI.
Park/Pickup Call Server Configuration Values
*Leave "value" fields blank to disable the park and pickup feature.
Server
Park Values*
Pickup Values*
Aasterisk
700
700
Sylantro
*98
*99
BroadWorks
*68
*88
ININ PBX
callpark
pickup
