15
14
English
Calling
Dialing the call number
All calls described in this section that are initiated by pressing the handset button
A
can also be
carried out in the hands-free mode using the loudspeaker button
H
.
Dialing call number with predial
When using predial, you have the opportunity to correct your entries before dialing.
t
Enter the call number in the idle state.
A
Press the handset button to dial.
Dialing call number with direct dialing
A
Press the handset button.
t
Enter the call number and end it with
#
; the number will be dialed immediately.
Note
Please enter the call number quickly, because four seconds after the last number is entered dialing will
be started even if
#
has not been pressed. If numbers have not been entered completely, the wrong
number will be dialed.
To end the conversation:
A
Press the handset button.
Calling from the redialing list
The 10 most recently dialed call numbers are saved in the redialing list. Each new number that is
dialed overwrites the oldest entry in the list.
You can see the call numbers in the redialing list and call up the corresponding details (e.g. call
time).
D
In the idle state, press
.
F
Select the desired call number.
A
Press the handset button to dial immediately.
Basic functions
Switching the ringer off
If you do not want to be disturbed (e.g. during a meeting), you can switch off the ringer (only the
ringer via the loudspeaker). To do this, press the
*
button until you hear a noise and
appears on the display.
To turn the ring tone back on, press and hold the
*
button again.
Alternatively, you can also use the menu “Audio > Ringer settings > Ringer device” to deactivate the
entry “Buzzer”, then the symbol
will also appear in the display.
Handset not attainable
When the “Do not disturb” function is activated, your handset is no longer attainable. However, calls
are still noted in your call list (as long as the call number is transferred). You will not be disturbed but
you can see calls, giving you the opportunity to return important calls if necessary.
Illumination
The illumination is activated each time a button is pressed and remains switched on for the set time
(can be set in the menu “Display > Illumination > Keypad”).
Change the display contrast
In order to adjust the display to on-site illumination/brightness, you can change the contrast. The
setting can be made in the menu “Display > Contrast”.
Handset secrecy button
If you do not want the person you are on the phone with to hear what you are saying e.g. to another
person in the room, you can momentarily activate the secrecy button.
You are in the middle of a conversation
D
Press
. The symbol
appears in the display.
The person you are talking to on the phone cannot hear what you are saying anymore.
When you want to talk to the person again, press the left softkey once more. The person you are on
the phone with can hear what you are saying again.
Mute
