Page 16 American Access Systems / Security Brands, Inc.
Erase All Codes -- Sub-Mode 0
Caution: This is a destructive Programming Mode. Completing the following steps will erase all
Access Codes except for the factory default Master Code (1 2 5 1). Use with Caution.
DETAILS: This Sub-Mode should rarely be used unless you want to completely erase all Access Codes entered. This
action will not change the Master Code.
To erase all Access Codes and Function Codes
• Enter the Master Code (The 1 2 5 1 cannot be deleted)
• Enter the numeral 0
• Both the Red and Yellow LEDs will flash several times and the unit will sound a GOODTONE once all of the
memory is cleared.
• Enter the Master Code to complete the process
• If the sequence is not validated by the unit, you will receive an ERROR TONE and be exited from this program
mode
• A GOOD TONE will sound to indicate all memory is cleared.
