Page 11 American Access Systems / Security Brands, Inc.
Delete Individual Access Codes -- Sub-Mode 2
To delete programmed Access Codes:
• Enter the Master Code
• Unit will sound a GOOD TONE
• Enter the numeral 2
• Unit will sound a GOOD TONE
• Enter the Access Code you want to delete
• Unit will sound a GOOD TONE
• An ERROR TONE indicates that Access Code is not in the memory
• If you make an entry error, simply press the star (*) key then enter the correct code
• Continue to enter Access Codes you wish to delete
• OR
• Enter pound (#) to exit the programming mode
NOTES:
• You can delete any Access or Function code that you wish with the exception of the MASTER CODE.
• If the code you want to delete is not found in memory, the unit will respond with an ERROR TONE and wait for
another code to be entered.
• A GOOD TONE will sound once the code has been found and deleted.
• You may continue deleting codes until you are done, then press the pound (#) key to exit the programming
mode.
Change the Master Code -- Sub-Mode 3
To change the Master Code:
• Enter the current Master Code
• Unit will sound a GOOD TONE
• Press the numeral 3
• Enter a new Master Code
• Unit will sound a GOOD TONE
• If you make an entry error, simply press the star (*) key and enter the number you wish
• Press the pound (#) key to exit the programming modeNOTES:
• Be sure to make a note of the new Master Code. It is the password to system operation.
• If the Master Code has been forgotten or lost, and you cannot enter Sub-Mode 3, you must perform a Master
Reset which will reset the Master Code to 1 2 5 1. You can then use Sub-Mode 3 to change the Master Code.
