Aaronia Spectran V4, User Manual

Page: 61 / 123

Configure with remote computer over a network connection
The second possibility to configure your SPECTRAN RSA is to connect a remote computer direcly to the RSA.
For a network connection between to computers without a router or a switch, you need a Crossover Network
cable .
Make sure that you use a crossover cable, otherwise the connection will fail.
Next step is to turn on your computer and the RSA.
Starting with the configuration on your PC:
Navigate into the network configuration of your operating system. Choose the network adapter you have
connected to the RSA and open the TCP/IP configuration.
Activate the option Static IP configuration and enter the IP address 192.168.178.30 and change the subnet mask
to 255.255.255.0
Save the settings and close all dialogs.
Now you can open your webbrowser and enter the address of the RSA (default: 192.168.178.33 ) in the
addressbar. Follow the instructions to enter the administration area like described in the chapter before. Start
here and go through the steps.
If you have finished the configuration, you can attach the RSA to your network and change the TCP/IP
configuration on your PC back to the configuration before.
Test Equipment Depot - 800.517.8431 - 99 Washington Street Melrose, MA 02176
TestEquipmentDepot.com