Aaronia Spectran V4, User Manual

Page: 106 / 123

Calculation commands (SPECTRAN:CALC)
The calculation commands don't work with the device direclty. They work on on a processing layer over the
device layer. Therefore we use it in an extra command set to control functions on the processor layer to avoid
conflicts between variable ids, and to have a abstraction layer for further calculation functions.
Overview:
SPECTRAN:CALC:PEAKSUPPRESSION [ ? | value] (or SPEC:CALC:PSUP)
Description: Check state, or enable / disable peak suppression
Command parameter:
? read state
1 enable peak suppression
0 disable peak suppression
Answer: AINFO Package with message
Enables/disables the RSA internal peak suppression on the ASWEEP data stream. This command
doesn't influence the TRACE data!
SPECTRAN:CALC:RECORD [ ? | value](or SPEC:CALC:REC)
Description: Check state, or enable / disable local recorder backend to record measurement
Command parameter:
? read state
1 enable recorder
0 disablerecorder
Answer: AINFO Package with message
SPECTRAN:CALC:BATCH_RECORD [ ? | value](or SPEC:CALC:BREC)
Description: Check state, or enable / disable local batch recording backend to record different
measurement settings
Command parameter:
? read state
1 enable recorder
0 disablerecorder
Answer: AINFO Package with message
SPECTRAN:CALC:TRACE_CURRENT [ ?] (or SPEC:CALC:TRACE_CUR)
Description: Sends the current sweep to requesting client
Command parameter:
? read state
Answer: AINFO Package with message, see format of sweep data below
Traces will always be send with enabled peak suppession. It IS NOT possible to turn of the suppression
on the traces! If you need the raw data, please use the measurement data stream of the ASWEEP
packages!
SPECTRAN:CALC:TRACE_MAXIMUM [ ?] (or SPEC:CALC:TRACE_MAX)
Test Equipment Depot - 800.517.8431 - 99 Washington Street Melrose, MA 02176
TestEquipmentDepot.com