Aaronia Spectran V4, User Manual

Page: 112 / 123

0x06 ATTENFAC HF / HF-V4 / NF Attenuation factor
-10=AUTO
0=OFF
and Range 1 to 30 dBm. The Value is positive
and is 'subtracted'.
0x07 REFLEVEL HF / HF-V4 / NF Reference level from -20 to 70dB
0x08 DISPRANGE HF / HF-V4 / NF Display range from 10 to 100dB
0x09 DISPUNIT HF / HF-V4 / NF Display unit
HF: 0=dBm 1=dBµV 2=V/m 3=A/m
NF: 0=Tesla 1=Gauss 2=A/m
0x0A PULSEMODE HF Pulse mode – 1 is on, 0 is off.
0x0A DETMODE HF-V4 Detector Mode 0=RMS 1=MIN/MAX
0x0A SENSMODE NF Sensor Mode (1D / 2D)
0=MAGNETIC X / XY
1=MAGNETIC Y / YZ
2=MAGNETIC Z / ZX
3=STATIC X / XY
4=STATIC Y / YZ
5=STATIC Z / ZX
6=ELECTRIC
7=ANALOG
0x0B DEMODMODE HF-V4 / NF Demodulator mode
HF: 0=OFF 1=AM 2=FM
0x0C SPECPROC HF / HF-V4 / NF Spectrum processing mode program number. This
program is called after a sweep has completed.
The default setting is program 150, which
evaluates the current markers and calculates
current Field Power (See disassembly of the
program).
0x0D ANTTYPE HF / HF-V4 Antenna type
0=HL7025
1=HL7040
2=HL7060
3=HL6080
4=H60100
0x0D DIMMODE NF 0=1D
1=2D
2=3D
0x0E CABLETYPE HF / HF-V4 Cable Type.
-1=NONE
0=1m standard cable
0x0E SAMPPROC NF 0=PEAK
1=MIN/MAX
0x0F RECVCONF HF / HF-V4 Receiver configuration
0=Spectrum
1=Broadband
0x0F UNITSCALE NF Divider used to scale display values
-1=Auto
0x1E CENTERFREQ HF / HF-V4 / NF Centre Frequency of the sweep in MHz. The
value modifies STARTFREQ and STOPFREQ with
/- Span/2.