11.0 Antenna mounting and handling
42
First, carefully screw the
SMA adapter
to the
SMA
socket
on the SPECTRAN. Screwing should be pos-
sible without much resistance.
Do not use excessi-
ve force!
As soon as you notice a resistance, slight-
ly tighten the connection using the
SMA tool
. Again,
do not apply excessive force! Never trigger the over-
torque protection (the
SMA tool
features an overtor-
que protection as soon as
excessive force
is
applied).
Now attach the HyperLOG antenna. For this, the
HyperLOG’s
guide rails
need to be pushed carefully
and
without force
into the designated
sensor
pickups
on the SPECTRAN until the
SMA socket
of
the HyperLOG antenna snaps and locks into the
SMA adapter
. Now screw the
SMA adapter
to the
HyperLOG antenna, as described before.
While
doing so, slightly and continuously push the
HyperLOG antenna further into the
sensor
pickups
on the SPECTRAN
. As soon as the
SMA
adapter
is screwed to the HyperLOG antenna, slightly tighten the connection
with the
SMA tool
, as described above.
Now attach the included
pistol-like grip
to the bot-
tom side of the HyperLOG antenna such that the
antenna and the SPECTRAN device make a single
unit and can be handled as shown in the image on
the left. The SPECTRAN device itself should be sup-
ported by the user’s arm. You now have a single,
compact, easy to handle measurement package.
Using the grip on the HyperLOG antenna, the com-
plete package can easily be adjusted as needed.
After unmounting the grip, the measurement package
can be stowed completely as-is into the Aaronia
carrycase. As such, it is ready-to-use for the next time
without further hassle.
Test Equipment Depot - 800.517.8431 - 99 Washington Street Melrose, MA 02176
Summary of Contents for SPECTRAN HF-2025
Page 72: ...23 0 For your notes 72...
