AAQ SXJS4019A, Installation Manual & Operation Instructions

Page: 4 / 74

⑨ ⑩ ⑪
2.2 Installation Site
：
2.2.1
、
The lift is designed to be installed inside a building , with no
obstructions in the space and good ventilation. The installation place shall not be
close to the washing area, paint, coating, corrosive solvent storage area and areas
where there may be danger of electric shock or explosion; ensure a minimum safe
distance (more than 2m) from walls or other equipment, and avoid emergency
passages.
2.2.2
、
All sources of ignition must be kept away from the installation location of
the lift, and there must be good ventilation around the lift.
2.3 Installation foundation requires
：
2.3.1
、
The minimum thickness of the concrete is 150mm; the strength is more
than 3000PSI.
2.3.2
、
The foundation ground of the lift needs to be made in its entirety, and no
pillar can be made separately for the foundation, and the deviation of the ground level
is less than 5mm.
2.3.3
、
The lift cannot be installed on two or more layers of concrete poured at
different times; it must not be installed on the floor laid with tiles or other decorative
materials.
2.3.4
、
Concrete cannot be placed directly on unconsolidated ground.
2.3.5
、
After the concrete is poured, you must wait until it is completely cured before
installing the lift; adjust the installation time accordingly according to the different
seasons, and the curing time must be more than 30 days. If necessary, perform concrete
maintenance work. (Because the temperature of concrete is lower than 5 ℃, its
strength will be greatly affected even after solidification, so it is not recommended to
make foundation work in winter.)
III
、
Installation Instructions
：
3.1 Before installation, roughly determine the installation position of the equipment
3
Only the personnel designated by the manufacturer or the professional and technical
personnel entrusted by the dealer can install this equipment. The installers must have
qualifications for practice; non-professional installation may cause serious personal or
equipment injury.
Install as shown in the exploded view.