AAON M3 Series Installation Operation & Maintenance Download Page 7 | Manualshive

Page: 7 / 76

background image

7

Safety

Attention should be paid to the following statements:

NOTE

- Notes are intended to clarify the unit installation, operation and maintenance.

CAUTION

- Caution statements are given to prevent actions that may result in

equipment damage, property damage, or personal injury.

WARNING

- Warning statements are given to prevent actions that could result in

equipment damage, property damage, personal injury or death.

DANGER

- Danger statements are given to prevent actions that will result in equipment

damage, property damage, severe personal injury or death.

ELECTRIC

SHOCK,

FIRE

OR

EXPLOSION HAZARD

Failure  to  follow  safety  warnings
exactly  could  result  in  dangerous
operation,  serious  injury,  death  or
property damage.

Improper  servicing  could  result  in
dangerous  operation,  serious  injury,
death or property damage.



Before servicing, disconnect all

electrical power to the unit. More
than one disconnect may be
provided.



When servicing controls, label all

wires

prior

to

disconnecting.

Reconnect wires correctly.



Verify proper operation after

servicing. Secure all doors with
key-lock or nut and bolt.

WARNING

Electric

shock

hazard.

Before

servicing,  disconnect  all  electrical
power  to  the  unit,  including  remote
disconnects,  to  avoid  shock  hazard
or  injury  from  rotating  parts.  Follow
proper Lockout-Tagout procedures.

WARNING

FIRE,  EXPLOSION  OR  CARBON
MONOXIDE POISONING HAZARD

Failure  to  replace  proper  controls
could  result  in  fire,  explosion  or
carbon  monoxide  poisoning.  Failure
to  follow  safety  warnings  exactly
could result in serious injury, death or
property damage. Do not store or use
gasoline  or  other  flammable  vapors
and  liquids  in  the  vicinity  of  this
appliance.

WARNING

«
...
5
6
7
8
9
...
»

Summary of Contents for M3 Series













































































Reviews:

No comments

Related manuals for M3 Series

CAD-COMPACT 500

Brand: S&P Pages: 20

Brand: Fedders Pages: 16

Brand: Komfovent Pages: 52

Brand: Vents Pages: 17

Vision CAH 003-090 C

Brand: Daikin Pages: 58

AMBERAIR COMPACT CXP

Brand: Salda Pages: 36

Brand: Xvent Pages: 21

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands