background image

18

  Manual / Repeat
          Manual or automatic command transmission can be selected.
        -When “Repeat” is selected, a command will be sent automatically in every setup time.
          The time can be set to the second.
        -When “Repeat” is not selected, a command is to be sent manually (by clicking the Command

button).

Table
     Records received data.
          To change the title, double-click the title of the table (New.csv).

Connect Name
          List of setup connection names. Connects to a selected instrument.

Test / Monitor button
          The connection can be checked in the “Test” display.
        -If there is a send data command function on the weighing instrument:
          When the “Test” button is clicked, the command set in the <Property> window will be sent.
          If  a  reply  to  the  command  is  displayed, the communication is normally made.

        -If there is no send data command function on the weighing instrument:
          Blank out the “Command” box in the <Property> window and click the “Test” button.
          Press the [PRINT] key, etc. on the weighing instrument to transmit data.
     If the data is displayed, the communication is normally made.
          Once started, it changes to the Monitor display to display received data.

Start / Stop button
     In the Start display, communication can be started by clicking this button.
          In the Stop display, communication can be stopped by clicking this button.

Command button
          To send a setup command, click this button.

Manual / Repeat
     Manual and automatic command transmissions can be selected.
        -When “Repeat” is selected, a command will be sent automatically in every setup time.
          The time can be set to the second.
    -When “Repeat” is not selected, a command has to be sent manually (by clicking the

“Command” button).

Summary of Contents for WinCT-Plus





































Reviews: